Pipefitter licensing in Oregon
Con licencia del estado
En Oregón, esta actividad está sujeta a licencia. Necesitas tu propia licencia de Oregón antes de trabajar aquí, o una de algún estado que Oregón reconozca.
✓ Verified 20 agosto 2026 · board verified
Oregón acepta licencias deYour hours travel — the exam does not
Apply for your Oregon license →
No reciprocity appears in the boiler-program rule. The experience standards (2,000 hours of B31 pipe-welding + 2,000 on pressure piping for Class 5) accept documented out-of-state hours by employer verification, then Oregon’s own exam issues the card. Open “Cómo traer tu licencia de otro estado” Consulta a continuación las condiciones y confirma con la junta directiva antes de viajar.
Comenzando como aprendiz
Oregón expide un certificado de aprendiz
- Cómo se llama
- Class 1 Trainee/Helper license
- ¿Quién lo expide?
- Oregon Building Codes Division (boiler program)
Presenta tu solicitud de aprendizaje en Oregón →
No experience prerequisite - supervised mechanical work on boilers, vessels and piping, no ASME code welding. A real license, on the same application form as the working classes.
The master pipefitter license
No - Oregon has no separate master pipefitter license.
Cómo traer tu licencia de otro estado
Nothing transfers — and almost nobody knows Oregon licenses this trade at all, because the cards live in the BOILER PROGRAM, not with the plumbers: Building Codes Division licenses, class by class, including a Class 5 PRESSURE PIPING MECHANIC and a Class 5-A PROCESS PIPING MECHANIC (ASME B31.3 by name). No reciprocity appears in the rule.
What travels is your HOURS: the experience standards accept documented out-of-state work by employer verification, and then Oregon's own exam issues the card.
¿Puedes trabajar mientras está en trámite?
The CLASS 1 TRAINEE/HELPER license is the lawful work-while-qualifying lane: no experience prerequisite, supervised mechanical work on boilers, vessels and piping — no ASME code welding — applied for on the same form as the working classes. No other pending-application provision was found; do not start on silence above Class 1 scope.
El examen y el horario
Match the class to the code you work: CLASS 5 (pressure piping) takes 2,000 hours of pipe-welding on ASME B31 pressure piping plus 2,000 hours on pressure piping and boilers; CLASS 5-A (B31.3 process piping) and CLASS 5-B (B31.5 refrigeration piping) run the same shape on their own codes; CLASS 6 is the welder's card — current ASME Section IX qualification, working for an approved employer.
File the boiler license application with a verification form from EACH employer whose hours you claim, wait for BCD's authorization letter, sit the exam; results come by mail within two weeks.
Cómo funciona el programa de aprendizaje aquí
Class 1 is the entry license — no experience required, supervised, non-welding. Registered apprenticeship runs alongside as the training system, but the BCD class license is the legal instrument on the work.
La situación local
None — the boiler program is statewide; municipalities handle building permits.
Si quieres trabajar por cuenta propia
The business side is CCB contractor registration plus the boiler program's permits — and the worker-side classes above are what put your people on the pipe legally. One boundary worth a call on unusual jobs: the licensing duty attaches through Oregon's boiler and pressure-vessel law, so for a standalone piping job with no boiler or vessel in sight, confirm with BCD which class the permit demands before quoting.
Plumbing scope (potable, waste) is the separate journeyman plumber program.
Se ha verificado con la junta estatal o la legislación correspondiente. Las normas pueden cambiar; confirma la información con la junta antes de viajar o aceptar un trabajo. Esta es información, no asesoría legal.
English 
Spanish